LIQFILL-150FM
The Automatic Rotary Monoblock 16x8 Head Liquid Bottle Filling and Capping Machine, Model LIQFILL-150FM, with flow meter liquid filling technology, is suitable for round, oval, flat or square bottles at a maximum speed of 120 bottles per minute.
The machine is available with a ROPP / plastic screw capping system or a Pick & Place type CRC screw capping system.
Rotary operation of bottles gives smoother movement at lower speed and higher output. Output depends on the nature of the liquid, bottle diameter, bottle height, bottle neck size and fill volume. The machine is built in stainless steel, with a heavy-duty M.S. frame clad in S.S. 304. Optional turn tables at in-feed and out-feed, with individual drives, match the speed of incoming and outgoing bottles for smoother operation. All parts in contact with liquids are made from S.S. 316.
Thanks to flow meter technology, no change parts are needed for a change in fill volume: the required volume is set directly from the touch screen on the control panel. The technology also offers simple, user-friendly operation, fewer moving parts in contact with the liquid and a higher level of filling accuracy.
Technical Specifications
| Bottle Diameter | 28mm to 70mm* |
| Bottle Height | 50mm to 200mm* |
| Fill Range | 15ml to 500ml* |
| Cap Size | 18mm to 55mm Diameter |
| Speed | Up to 120 bottles per minute, depending on fill volume and type of liquid |
| Conveyor Height | 900-950 mm |
| Overall Dimensions | 3800 mm (L) x 1570 mm (W) x 2225 mm (H) |
| Compressed Air | 5 to 7 bar air pressure required, to be provided by the customer |
| * Specification can be changed as per customer's requirements | |
Utility Requirement
| Filtered Compressed Air | 5 to 7 bar air pressure required; suitable capacity pressure pump |
| Electrical | 440 VAC 3 phase / 220 VAC single phase power supply (50 Hz) |
| Power | 5.0 HP |
Special Features
- Flow meter for high fill accuracy and repeatability
- Electronically controlled volume settings through HMI; no mechanical settings required
- Built-in PLC with colour touch screen operation
- No Bottle - No Fill system
- No Bottle - Machine Stop system
- Rotary bottle movement for smoother operation
- All contact parts made of SS 316 with easy removal system
- Very high fill accuracy of +/- 1 to 1.5 ml for any fill volume up to 250 ml, and +/- 2 ml above 250 ml pack size
- Optional higher fill accuracy of +/- 0.5 to 1 ml
- Suitable for syrups and suspensions of higher viscosity
- Automatic in-feed and exit of bottles
- Minimum change-over time
- Built-in A.C. variable frequency drive system
- Fully stainless steel finish
- Simple change-over for different bottle sizes, with no change parts for different fill volumes
- Handles ROPP as well as normal screw caps with the help of change parts
- Available with Pick & Place screw capping for CRC / special caps
- Filling and capping in a single machine (monoblock design)
- Special 3-in-1 model available with ROPP as well as plastic screw capping station
- All features mentioned above may not be part of the standard machine; please check your requirement.
×
